Volumes and Issues  Contents of Issue 3  Special Issue  
Hydrol. Earth Syst. Sci. Discuss., 6, 3835-3862, 2009
www.hydrol-earth-syst-sci-discuss.net/6/3835/2009/
doi:10.5194/hessd-6-3835-2009
© Author(s) 2009. This work is distributed
under the Creative Commons Attribution 3.0 License.


Examining the effect of pore size distribution and shape on flow through unsaturated peat using 3-D computed tomography

F. Rezanezhad1, W. L. Quinton1, J. S. Price2, D. Elrick3, T. R. Elliot3, and R. J. Heck3
1Cold Regions Research Centre, Wilfrid Laurier University, Waterloo, Canada
2Department of Geography, University of Waterloo, Waterloo, Canada
3Department of Land Resource Science, University of Guelph, Guelph, Canada

Abstract. The hydraulic conductivity of unsaturated peat soils is controlled by the peat structure which affects the air-filled porosity, pore size distribution and shape. This study investigates how the size and shape of pores affects the flow of water through peat soils. In this study we used X-ray Computed Tomography (CT), at 45 µm resolution under 5 specific soil-water pressure head levels to provide 3-D, high-resolution images that were used to detect the inner pore structure of peat samples under a changing water regime. Pore structure and configuration were found to be irregular, which affected the rate of water transmission through peat soils. The 3-D analysis suggested that pore distribution is dominated by a single large pore-space. At low pressure head, this single large air-filled pore imparted a more effective flowpath compared to smaller pores. Smaller pores were disconnected and the flowpath was more tortuous than in the single large air-filled pore, and their contribution to flow was negligible when the single large pore was active. We quantify the pore structure of peat soil that affects the hydraulic conductivity in the unsaturated condition, and demonstrate the validity of our estimation of peat unsaturated hydraulic conductivity by making a comparison with a standard permeameter-based method. Estimates of unsaturated hydraulic conductivities were made for the purpose of testing the sensitivity of pore shape and geometry parameters on the hydraulic properties of peats and how to evaluate the structure of the peat and its affects on parameterization. We also studied the ability to quantify these factors for different soil moisture contents in order to define how the factors controlling the shape coefficient vary with changes in soil water pressure head. The relation between measured and estimated unsaturated hydraulic conductivity at various heads shows that rapid initial drainage, that changes the air-filled pore properties, creates a sharp decline in hydraulic conductivity. This is because the large pores readily lose water, the peat rapidly becomes less conductive and the flow path among pores, more tortuous.

Discussion Paper (PDF, 1024 KB)   Interactive Discussion (Closed, 6 Comments)   Final Revised Paper (HESS)   

Citation: Rezanezhad, F., Quinton, W. L., Price, J. S., Elrick, D., Elliot, T. R., and Heck, R. J.: Examining the effect of pore size distribution and shape on flow through unsaturated peat using 3-D computed tomography, Hydrol. Earth Syst. Sci. Discuss., 6, 3835-3862, doi:10.5194/hessd-6-3835-2009, 2009.   Bibtex   EndNote   Reference Manager    XML